Filter
Top Products
MIC412TI and MIC412TF Camera | Installation and Operation Manual AAA EN | 51
Bosch Security Systems Issue 8
CHAPTER 5
Technical Specifications
MIC412TI and TF Dual Optical/Thermal PTZ Camera
CAMERA MODULE (OPTICAL)
Image sensor 1/4” EXview CCD
Picture elements 380K NTSC / 440K PAL (WIDE)
Horizontal resolution WDR 36x modules 530 TVL NTSC / PAL
Filter Automatic mechanical IR cut filter
Focus system Auto or manual
Iris Auto or manual with slow shutter integration
modes
Synchronisation Internal / External (V-Lock)
Signal/Noise ratio 50 dB or more
Back Light Compensation (BLC) On/Off
White balance Automatic
Automatic Gain Control (AGC) -3 to -28 dB, 2dB steps
Aperture control 16 Steps
36x optical zoom module
Lens F=3.4 mm (WIDE) to 122.4 mm (TELE),
F1.6 to F4.5
Zoom 36x optical (12x digital)
Angle of view 57.8º (WIDE end) to 1.7º (TELE end)
Minimum illumination 1.4 lux (1/60s NTSC, 1/50s PAL, F1.6,
50 IRE),
0.1 lux (1/4s NTSC, 1/3s PAL, F1.6,
50 IRE)
0.01 lux (1/4s NTSC, 1/3s PAL, ICR ON)
Shutter speed NTSC: 1/4 to 1/10,000s (22 steps)
PAL: 1/3 to 1/10,000s (20 steps)
1/10,000s (20 steps) PAL
CAMERA MODULE (THERMAL)
Lens 50mm
Image sensor Focal Plane Array (FPA), un-cooled
Vanadium Oxide microbolometer
(MIC412TI: 7.5Hz NTSC, 8.3Hz PAL)
(MIC412TF: US export licence required:
30Hz NTSC, 25Hz PAL)
Picture elements 324 (H) x 256 (V)
Spatial resolution 0.760 mrad with 50 mm lens
Field of view 14° (H) x 11° (V) with 50 mm lens
Focus Factory-set at infinity focus
Detection range Human: 780 m (2559 ft)
Object : 2.2 km (7218 ft)
Spectral response 7.5 to 13.5μm
Thermal sensitivity <85 mK at F1.6
Features White hot, black hot and false colour
OPERATIONAL*
E-flip Yes
Manual flip Yes
Presets 64 telemetry presets accurate to less than
0.1° utilising resolver technology (using FV
protocol, 10 camera set-up presets to allow
ANPR, colour correction etc.)
Preset tours 6 tours, each with up to 32 presets
Sector titles Yes (64 sectors), 20 characters per title
Preset titles 20 character caption for each of the 64
presets
Home position Yes (preset 1 or tour)
COMMUNICATION & PROTOCOLS
Communication RS485 / RS422
Control Protocol Refer to protocol list on datasheet