Canon 100 IS Digital Camera User Manual


 
Changing the Color and Shooting
90
Y Color Swap
You can swap one color in an image for another when recording it. You can
only swap one color.
Select Y.
Set the mode switch to 4, the press the
m button.
Press the op buttons to select G.
Press the qr buttons to select U
(rightmost icon), then press the l
button.
Press the qr buttons to select Y, then
press the m button.
Press the l button.
The unchanged image and the Color
Swap image will both display.
The default setting is to change green to
gray.
Specify the color to be swapped.
Position the center frame so it is filled with
the color you want and press the q button.
The specified color will be recorded.
Using the flash may cause unexpected results in this mode.
The recorded color will be saved even if you turn off the power.