Filter
Top Products
Operating Instructions
125
11. Click [Go to Trigger page].
• The Trigger page is displayed.
Note
• If you set a short interval to transfer image to a mobile phone, many E-
mails may be sent to it leading to a large phone bill. Therefore, we
recommend you to set a long interval. 1 image per minute frequency is
recommended.
• Motion Detection transfer stops its operations until the camera finishes all
transfers. For example, if the camera transfers 3 images per minute and 6
images in total, the Motion Detection will be in the following operation.
• If you are buffering images on the internal memory, the following
operations also delete all buffered images.
– Turning off the camera.
– Saving the Date and Time page.
– Restarting, updating firmware or resetting the camera to factory
default.
Note
• A change due to light or wind may detect motions mistakenly.
• Motion detection level is changed depending on resolution, image quality,
and object situation. Confirm the level by performing motion detection
recording.
• Enabling Motion Detection delays the frame rate of the camera.
• Objects moving fast may not be detected.
• Motion Detection may not work in the dark.
Detectable DetectableUndetectable
1st 2nd 3rd 4th 5th 6th
120 seconds
A Motion Detection signal is detected.