Filter
Top Products
Operating Instructions
33
Changing or Deleting the Settings
1.
Click [Program].
• [Program] switches to [Cancel].
Click [Cancel] to quit without
saving changes.
2. Pan and tilt the camera to a desired
position, or skip to step 5 if deleting
a preset.
3. Zoom to the desired position.
4. Adjust the focusing if necessary.
5. Select the home position, alarm
position or a registered preset
position button (1—8) or (1—20).
Note
• All the items can be selected
from drop-down list. It is also
possible to set positions 1 to 8
as preset buttons.
6. Set the preset name, and click
[Save], or click [Delete].
• To quit the change or deletion,
click [Back], and then [Cancel].
• If "Success!" is displayed, the
position has been registered
successfully. Click [Back].
Note
• The home position and alarm position
cannot be deleted, nor can their
names be changed.
Preset Name
Preset (1) Name
Save
Delete
Back
UpperLeft
Changing
the name
Preset
number
Pan/Tilt
Home
Position
Zoom
Focus
The deleted
button turns
white.
The preset
number and
preset name
disappear.
Only buttons
1 to 8 are
displayed.
Home
Position,
Alarm
Position
and
Preset
Position